RC Filters

From AstroBaki
Revision as of 15:38, 30 August 2012 by Aparsons (talk | contribs)
Jump to navigationJump to search

Short Topical Videos

Reference Material

  • Horowitz & Hill, The Art of Electronics, 2nd Ed., Ch. 1

RC Filters

RC filters uses resistors () and capacitors () to make circuits that have frequency-dependent responses to input waveforms. They are passive circuits that operate on the same principle as the voltage divider, but make use of the imaginary, frequency-dependent impedances of capacitors. Recall that the impedances of resistors and capacitors are given by:

where . Regardless of whether you are construction a low-pass or high-pass filter, RC filters have a characteristic frequency at which their frequency response evolves most rapidly. This timescale is given by the product . In a great triumph of SI units,

The frequency response of filters is typically given by the cutoff frequency at which a signal is attenuated by 3dB. For RC filters (both low-pass and high-pass), this happens when the magnitude of the impedance of the resistor and the capacitor are equal:

Low-Pass Filter

Rc lowpass.png

A passive RC low-pass filter

High-Pass Filter

Rc hipass.png

A passive RC hi-pass filter