# Difference between revisions of "RC Filters"

### Reference Material

• Horowitz & Hill, The Art of Electronics, 2nd Ed., Ch. 1

## RC Filters

RC filters use resistors ($R$ ) and capacitors ($C$ ) to make circuits that have frequency-dependent responses to input waveforms. They are passive circuits that operate on the same principle as the voltage divider, but make use of the imaginary, frequency-dependent impedances of capacitors. Recall that the impedances of resistors and capacitors are given by:

{\begin{aligned}Z_{R}&=R\\Z_{C}&={\frac {1}{j\omega C}}\\\end{aligned}}\,\! where $j\equiv {\sqrt {-1}}$ . Regardless of whether you are construction a low-pass or high-pass filter, RC filters have a characteristic frequency at which their frequency response evolves most rapidly. This timescale is given by the product $RC$ . In a great triumph of SI units,

$1\ s=1\Omega \cdot 1F.\,\!$ The frequency response of filters is typically given by the cutoff frequency at which a signal is attenuated by 3dB. For RC filters (both low-pass and high-pass), this happens when the magnitude of the impedance of the resistor and the capacitor are equal:

{\begin{aligned}|Z_{R}|&=|Z_{C}|\\|R|&=\left|{\frac {1}{j\omega C}}\right|\\\omega _{-3dB}&={\frac {1}{RC}}\\\end{aligned}}\,\! ### Low-Pass Filter

A passive RC low-pass filter

### High-Pass Filter

A passive RC hi-pass filter